Motion Only mode (a.k.a Ultra Low Power mode) is designed to maximise battery life of your GPS by using the Motion Sensor only. 



Motion only mode uses the motion sensor only meaning it will not report on demand, nor as per schedule. Only on movement events



It is a great option to keep an eye on valuables that don't move much and you want to be alerted if they do. 



To set up and turn on motion only mode please see below.


Via the APP:


1. Select your device and on the map page, swipe up to pull up the menu.

2. Click on manage alerts


3. Scroll down to Motion Sensor and ensure both it AND Motion Only Mode is enabled (button will turn green when on).



Via the Portal:



1. Login to your account on the portal at manage.theairbolt.com



2. Choose your device and click the "..." button





3. Select Alerts & Reports



4.  Scroll down to the Motion Sensor section and switch the toggle to on for the accelerometer (enable) and

5.  Turn on Motion Only Mode as well.









6. You will then need to set up the other settings as well - please see Accelerometer Settings below.









Accelerometer Settings:



Sensitivity:


Set the sensitivity by choosing a number from 1 to 10. The higher the number, the more sensitive. This means smaller movements will trigger it. The lower the number, means larger movements will be needed to trigger it. 




Re-Alerts:


Re-alert after is there to stop it sending alerts too often. Choose a time frame that you don't want another alert for. You can stop of it sending multiple alerts for the time you set in this setting.  For example, setting it to 30 minutes means you will not get another alert from the accelerometer for at least 30 minutes after the previous alert.